Broadmax Linkmax HSA 300A-2 LEDs
HSA 300A-2 Troubleshooting Chart
| LED |
Power |
Sync/PPPoE |
LAN |
WAN |
| On |
Unit has power |
Sync established |
Ethernet link established |
N/A |
| Blinking |
N/A |
No sync |
Data passing over ethernet link |
Data passing over DSL |
| Off |
Unit has no power |
N/A |
No ethernet link established |
DSL link inactive |
Legend
- Power: This is the Power light.
- Sync/PPPoE: This is the Sync light.
- LAN: This is the LAN light, and the LAN Activity indicator.
- WAN: This is the WAN Activity indicator
Caveats
- Modem may return ATM channel pings 8211; some
do, some do not. It depends on the version of the firmware.
- Modem uses the inside two pins on the phone jack.
- The modem can be configured to use either truck VP/VC 0/35 or 8/35. The
default is 0/35.
- A Broadmax that has been configured to use PPPoE may show a flashing
green Sync/PPPoE light even when sync has been established. This is meant to
indicate that PPPoE negotiation has failed.
|
