Your standards are high. You have a lot invested in your audio system. TARA Labs has created the only cables that can satisfy your need to own the very best: Prism Series speaker cables and interconnects.
The job of an audio cable is to transfer a signal from one stereo component to another. It sounds simple, but many cables degrade or modify the signal due to poor design or inadequate materials.
Although not expensive, TARA Labs' Prism Series cables use the very best materials and engineering. Prism Cables are constructed using the same materials and techniques as our more expensive cables.
We start with TARA Labs' exclusive "Optimized Bandwidth"TM solid core conductors. The "super-annealed" high purity copper and Aero-PETM insulation are the same used in out top of the line cables. This unique construction conveys a sense of musical balance and immediacy that stranded or braided cables just can't match.
All materials, from the gold RCA plugs to the lead-free silver solder, are chosen for maximum performance and long life. Prism cables are hand-assembled and each is individually tested at our factory in Oregon.
Accurate with a touch of sweetness. Smooth, analog-quality
sound. Imparts a warm, rich sound to bright or forward
systems. Our best-selling interconnect.
Termination: RCA only.
Use for:
Tuners; VCR/laser disc sound; modestly priced CD players;
tape decks.
Systems with a tendency toward brightness.
Runs of 2.0 m or less.
Don't Use for:
Softer sounding components or systems.
High RF environments where shielding is required.
Runs over 2.0 m.
Smooth, open sound. Accurate, precise imaging. Detailed,
dynamic; best-sounding interconnect in its price range.
Termination: RCA only.
Use for:
Long runs where shielding is required and cost is a factor.
Home theater.
Don't Use for:
Systems that tend toward harshness or brightness.
Big, powerful, rich sound. Sweetens overly bright or thin
sounding systems without loss of detail.
Termination: RCA only.
Use for:
Systems which sound overly bright or harsh.
Better cassette decks.
Better quality CD players.
Don't Use for:
Systems with a tendency to roll off highs.
Systems with excess mid-bass bloom.
Prism 5500 offers the greatest musical accuracy and the most
versatility of all the Prism interconnects.
Termination: RCA or XLR.
Use for:
All-around use.
The ultimate for better quality, moderately priced
equipment.
Equipment requiring balanced connections.
Smooth sound with exceptional clarity and dynamics. Large,
well-defined soundstage. Softens harsh "etched" sound of
some CD components.
Termination: RCA or BNC.
Use for:
Moderately priced digital transport to D/A hook-up.
Components requiring AES/EBU configuration.
The reference among AT&T glass cables because of its high
quality ceramic connectors and the finely polished finish of
the glass fiber. 1 gigahertz bandwidth; attenuation less
than 0.0016 dB/meter at 1 gigahertz.
Termination: Standard AT&T connector.
Use for:
Any components requiring AT&T connectors.
Our most affordable speaker cable and the winner of a "Home
Theater" Magazine speaker cable comparison. Smooth sound,
solid bass.
Use for:
In-wall installations of audio or home theater.
Long runs where cost is a factor.
Moderately priced systems.
Similar to Prism Klara but with increased level of clarity
and detail. Warm, smooth sound.
Use for:
Mid-fi to entry level audiophile systems.
Long runs where cost is a factor.
Don't Use for:
High-end systems that would benefit from more clarity,
definition and transparency.
Improved bass articulation, more open mid-range and smoother
top end than Prism Omni. Increased clarity and dynamics
over Prism Klara.
Use for:
Bi-wired speakers; our most affordable single-run bi-wire
cable.
Long runs where bi-wiring is required and cost is a factor.
Don't Use for:
High-end systems that would benefit from more clarity,
definition and transparency. (See Prism Bi-Wire)
Performance that far surpasses expectations at this price
point. Clean, clear accurate sound. Increased coherence
and frequency extension over Prism 2+2.
Use for:
Our best buy for bi-wire speakers.
Long runs where bi-wiring is required and cost is a factor.
Entry-level audiophile systems.
Our UL/CL-3 rated speaker cable for in-wall installation.
Same configuration as Klara; similar smooth sound.
Revealing, realistic video or laser disc sound reproduction.
Use for:
All home theater and surround-sound applications.
In-wall installation where UL-CL/3 rating is required.
All entry-level audio and home theater speakers.
Don't Use for:
THX or dipolar rear channel speakers (See Prism Install
416).
Our UL/CL-3 rated speaker cable for in-wall installation.
Same configuration as Klara; similar smooth sound.
Revealing, realistic video or laser disc sound reproduction.
Use for:
Single cable runs to dipolar side or rear channel speakers.
In-wall installation.
Can be bi-wired in single run.
Don't Use for:
normal front or rear channel speakers (See Prism Install
216).
Instant improvement in overall sound quality over OEM-supplied
cables. Improved dynamics, bass extension, and soundstaging.
Use for:
All mid-fi and entry-level high-end components.
Instant upgrade of mid-fi and entry-level high-end components.
Use for:
RF-rich environments.
Electrostatic speakers.
Clean, crisp bass. Large, open soundstage.
Performance surpassed only by RSC power cords.
Use for:
Better quality high-end components.
Improved definition, picture resolution and color saturation
over OEM-supplied cables. Also available in RGBS
configuration.
Termination: RCA, F-Type or BNC.
Use for:
Use to improve performance of most VCR units over
OEM-supplied cables.
Long runs.
Don't Use for:
High-end projection video link. (See Prism Video HT or RSC
Video.)
Total enhancement of picture resolution. Improved
brightness, contrast ratio and color saturation. Performance
surpassed only by RSC Video. Also available in RGBS
configuration.
Termination: RCA, F-Type or BNC.
Use for:
Components requiring strict 75 ohm impedance.
Use to improve performance of most VCR units over
OEM-supplied cables.
Long runs.
High resolution of video images: increased sharpness and
color saturation over OEM cables.
Termination: S-Video
Use for:
Moderately priced mass-market video players and processors
using S-Video connectors.
Don't Use for:
Runs over 2.0 meters.
Ultra-high video resolution; excellent color saturation and
increased brightness and depth of field.
Termination: S-Video
Use for:
Better quality video players and processors using S-Video
connectors.
S-Video hook-ups requiring long interconnect runs.
Don't Use for:
Runs over 5.0 m (See RSC Video).