[Caution] Installation will require difficult internal soldering in an SMD environment inside the IC7300.
This may beyond what many should choose to attempt !
Description of this project. MUST READ !!!
It's only a few parts but installing it in an Icom IC7300 **** IS
NOT EASY*** ! Read the Description and look at the photos.
You might permanently damage your radio if it isn't done
carefully. I take no responsibility for this if it occurs.
Locking an IC7300 with this interface requires ~10 dBm at
41.344 MHz, from a good external reference. Either a Bodnar GPSDO or
the GPSDO Reference Board described elsewhere on this site
can work well.
|
||||
Item Description |
Provider |
Source Code |
Notes |
Approximate Material Cost(excludes setup fees and shipping) |
Assembled IPLL PCB |
Download IC7300PLL Kit Files |
Download IC7300PLL Source Files |
US$15 | |