Soundscape Product Listing
The Caspian Integrated Amplifier
Every aspect of this integrated amplifier is designed to provide performance from its respective circuit topology. The Caspian, housed in a full width steel case and solid aluminum front panel, has the distinctive and classic look which will last for decades.
Each section of the circuit topology of the Caspian Integrated Amplifier is designed to provide optimum performance.
High quality components together with a carefully designed circuit layout keep the signal path as pure as possible. Relays are used for input selection and tape monitor. Inputs are buffered by discrete symmetrical emitter follower amplifiers. Pre and power amplification stages are dual mono in design with discrete symmetrical differential amplifiers. Finally a high quality motorised potentiometer is utilised to eliminate any imprint on the signal and allow tine volume control.
The microprocessor and the logic controls are on a separate printed circuit hoard mounted behind the front panel and away from the amplifier section. This board is powered by its own dedicated regulators from a separate winding on the transformer to provide optimum isolation between logic and music signals.
The Caspian Integrated Amplifier is designed and built to a standard suitable for use with the best available source and loudspeaker components.
Features:
- Full functional remote control unit.
- Full functional system remote comander (optional).
- Five line input functions plus tape input and output.
- Manual input selector.
- Tape monitor function.
- Manual standby function.
- Input and status indicator display.
- Motorised volume control with LED position indicator.
- -20db mute function.
- Two preamplifier outputs.
- Power amplifier input.
- 350VA ultra low noise, low leakage Toroidal transformer.
- Short circuit protection.
- Power supply failure detection.
- Pre power-up diagnostic check.
- Gold plated input RCA connectors and speaker output binding posts.
Specifications
- Line Inputs: 5 plus Tape
- Line Outputs: Tape, Preamplifier (x2)
- Power Outputs: Loudspeakers, L & R
- Power Supply: 330VA Toroidal transformer, 4 regulated supply rails
- Power Outputs: 70W/Ch continuous, into 8 Ohms (both channels driven) 100W/Ch continuous into 4 ohms (both channels driven)
- Current Output: 50 Amps Peak to Peak
- Distortion : 0.003%, 1kHz - 8 Ohms
- Freq. Response : -3dB overall (Pre & Power)
- Damping Factor: 140 (8 Ohms)
- Sensitivity (70W): Line 240 mV
- Gain: 40dB overall (Pre & Power)
- 9.3dB Preamplifier
- 30.7dB Power Amplifier
- Input Impedance: 47kOhm
- Output Voltage: 240mV (Tape out)
- 700mV (Pre out)
- S/N Ratio: Line: 108dBA (ref 500mV)
Power consumption:
- Standby less than 5W
- Maximum less than 230W
- Turntables
- Caspian Integrated Amplifier
- Caspian Power Amplifier
- Caspian CD Player
- Caspian Precision FM Tuner
- Other Roksan Products
- Prices
Extended Warranties Available!
ORDERING ONLINE
click here!
ORDERING BY PHONE
If there is no authorized dealer in your area you can order directly from Soundscape with a 10-day, satisfaction, money-back guarantee.
US and Canada, 1-800-450-HIFI (1-800-450-4434)
Outside the US and Canada, (707) 578-4434
Monday - Friday 11:00 AM - 7:00 PM (PST)
Fax: (707) 578-4436
1044 Fourth Street, Santa Rosa, CA 95404
Phone/Fax 707-578-4434 or 800-450-HIFI
marcs@sonic.net
