Custom Box Insert

This product is designed to replace the typical box spring. It is placed into the metal or wooden rails of your existing bed frame. These wood frame inserts are custom made to fit your existing frame. You will provide us with the inside measurements of the side rails and length of your frame. Please also indicate the rise and seat of the (metal or wood) side rails of your existing frame and the desired height of the wood frame insert.

Please indicate if there is anything that would impede a simple box from sliding into your frame. We will allow a quarter of an inch ‘wiggle’ room, so therefore it is important that your measurements be accurate within an eight of an inch. (we need 5 measurements - 3 for the width - top, bottom and center, and 2 for the length - one on each side).

These inserts are made with pine and fir wood. They are finished with a ‘non-toxic when dry’ tung oil finish. Everything is pre-drilled and ready for easy assembly. Only a Phillips screwdriver is needed.

We offer two depths of inserts (see below). Fir slats are included.

Prices will vary with customized details:

Prices below are US. For availability and prices of the box insert in Canada, contact us by phone: 866-552-0167 or email.

Single - approx. 39” by 76” 5.5” $370. 7.5” $415. Double 54” by 76” 5.5” $440. 7.5” $465. Queen 60” by 80” 5.5” $475. 7.5” $500. E. King 78” by 80” 5.5” $560. 7.5” $600. C. King 72” by 84” 5.5” $560. 7.5” $600.